MOBILE Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP Black/White list Operator black/white list Band management Band lock, Used band status display APN Auto APN Bridge Direct connection (bridge) between mobile ISP and device on LAN Passthrough Router assigns its mobile WAN IP address to another device on LAN Multiple PDN (optional) Possibility to use different PDNs for multiple network access and services (not available in standard FW) WIRELESS Wireless mode IEEE 802.11b/g/n, Access Point (AP), Station (STA) WiFi security WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation SSID SSID stealth mode and access control based on MAC address WiFi users up to 100 simultaneous connections Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, built in customizable landing page ETHERNET WAN 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX LAN 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX NETWORK Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT, Wake On Lan (WOL) VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection Firewall Port forward, traffic rules, custom rules DHCP Static and dynamic IP allocation, DHCP Relay, Relayd QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e DDNS Supported >25 service providers, others can be configured manually Network backup VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover Load balancing Balance your internet traffic over multiple WAN connections SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW) SECURITY Authentication Pre-shared key, digital certificates, X.509 certificates Firewall Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) VLAN Port and tag based VLAN separation Mobile quota control Set up custom data limits for both SIM cards WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter Secure Boot Cryptographic integrity check of the each system boot process (available on device with special order code RUT955T073B0). VPN OpenVPN Multiple clients and server can be running simultaneously, 12 encryption methods OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC IPsec IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) GRE GRE tunnel PPTP, L2TP Client/Server services can run simultaneously Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code DMVPN Method of building scalable IPsec VPNs SSTP SSTP client instance support ZeroTier ZeroTier VPN WireGuard WireGuard VPN client and server support MODBUS MODBUS TCP SLAVE ID range Respond to one ID in range [1;255] or any Allow Remote Access Allow access through WAN Custom registers MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality MODBUS TCP MASTER Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) MODBUS RTU MASTER (RS232) Supported baud rates From 300 to 115200 Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Number of data bits From 5 to 8 Number of stop bits 1 or 2 Parity None, Even, Odd Flow None, RTS/CTS, Xon/Xoff Duplex Full duplex MODBUS RTU MASTER (RS485) Supported baud rates From 300 to 115200 Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Number of data bits 8 Number of stop bits 1 Parity None, Even, Odd Flow None, Xon/Xoff Duplex Half duplex MODBUS DATA TO SERVER Protocol HTTP(S), MQTT, Azure MQTT MQTT GATEWAY MQTT gateway Allows sending commands and receiving data from MODBUS Master through MQTT broker DNP3 Supported modes TCP Master, DNP3 Outstation, RTU Master MONITORING & MANAGEMENT WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log FOTA Firmware update from server, automatic notification SSH SSH (v1, v2) SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET Call Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off, answer/hang-up with a timer TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem MQTT MQTT Broker, MQTT publisher SNMP SNMP (v1, v2, v3), SNMP trap JSON-RPC Management API over HTTP/HTTPS MODBUS MODBUS TCP status/control RMS Teltonika Remote Management System (RMS) IoT  PLATFORMS Cloud of Things Allows monitoring of: Device data, Mobile data, Network info, Availability ThingWorx Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP Azure  IoT  Hub Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure  IoT  Hub server SYSTEM CHARACTERISTICS CPU Atheros Wasp, MIPS 74Kc, 550 MHz RAM 128 MB, DDR2 FLASH storage 16 MB, SPI Flash FIRMWARE / CONFIGURATION WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup, restore point FOTA Update FW/configuration from server RMS Update FW/configuration for multiple devices Keep settings Update FW without losing current configuration FIRMWARE CUSTOMIZATION Operating system RutOS (OpenWrt based Linux OS) Supported languages Busybox shell, Lua, C, C++ Development tools SDK package with build environment provided LOCATION TRACKING GNSS GPS, GLONASS, BeiDou, Galileo and QZSS Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS NMEA NMEA 0183 NTRIP NTRIP protocol (Networked Transport of RTCM via Internet Protocol) Server software Supported server software TAVL, RMS Geofencing Configurable multiple geofence zones SERIAL RS232 DB9 connector, full RS232 (with RTS, CTS) RS485 RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate Serial functions Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client INPUT/OUTPUT Input 1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4 pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high) Output 1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4 pin power connector) Events SMS, EMAIL, RMS USB Data rate USB 2.0 Applications Samba share, USB-to-serial External devices Possibility to connect external HDD, flash drive, additional modem, printer Storage formats FAT, FAT32, NTFS SD CARD Physical size Micro SD Applications Samba share, Storage Memory Expansion, DLNA Capacity Up to 64 GB Storage Formats FAT32, NTFS, ext2, ext3, ext4 POWER Connector 4 pin industrial DC power socket Input voltage range 9 – 30 VDC reverse polarity protection; surge protection >31 VDC 10us max PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards Power consumption < 2 W idle, < 7 W Max PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) Ethernet 4 x RJ45 ports, 10/100 Mbps I/O’s 2 x Inputs and 2 x Outputs on 10 pin industrial socket, 1 x Digital input and 1 x Digital output on 4 pin power connector (available from HW revision 1600) Status LEDs 1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED SIM 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional) Power 1 x 4 pin power connector Input/output 1x 10 pin industrial socket for inputs/outputs Antennas 2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x SMA for GNSS USB 1 x USB A port for external devices SD card Micro SD card slot RS232 1 x DB9 socket RS485 1 x 6 pin industrial socket Reset Reboot/User default reset/Factory reset button PHYSICAL SPECIFICATION Casing material Aluminium housing, plastic panels Dimensions (W x H x D) 110 x 50 x 100 mm Weight 287 g Mounting options DIN rail (can be mounted on two sides), flat surface placement OPERATING ENVIRONMENT Operating temperature -40 °C to 75 °C Operating humidity 10% to 90% non-condensing Ingress Protection Rating IP30 REGULATORY & TYPE APPROVALS Regulatory CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance CE/RED, FCC, IC, PTCRB, RCM, EAC, CCC, RoHS, WEEE, IP rating, Anatel, GCF, REACH, E-mark, DNV GL, ECE Regulation 118, Morocco ANRT, Thailand NBTC, Ukraine UCRF, SDPPI (POSTEL), WiFi Certified, MODBUS Conformance Operator AT&T, Verizon Vehicle ECE R10 (E-mark) ECE R118 EMI IMMUNITY Standards Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0 FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014) ESD EN61000-4-2:2009 RS EN 61000-4-3:2006 + A1:2008 + A2:2010 EFT EN 61000-4-4:2012 Surge immunity (AC Power Line) EN 61000-4-5:2006 Surge immunity (Ethernet ports) EN 61000-4-5:2014, clause 7.1 of ITU-T K21 Transient and surges ISO 7637-2:2004 CS EN 61000-4-6:2009 DIP EN 61000-4-11:2004 RF Standards EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1, EN 303 413 V1.1.0 AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017 FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017) RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1 SAFETY Standards IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013 AS/NZS 60950.1:2015 EN 50665:2017, EN 62311:2008 FCC 47 CFR Part 1 1.1310 RSS-102 Issue 5 (2015) ENVIRONMENTAL Ingress Protect LST EN 60529:1999+A1+AC:2002 Vibration Class guideline-DNVGL-CG-0339:2016 EN 60068-2-6:2008