ČAMAC Rotomolded polyethylene Pan’s Marine P450

ČAMAC IZRAĐEN OD ROTOPLASTIKE IZUZETNO ČVRST I OTPORAN NA UDARCE (ŽILAVA PLASTIKA) LAGAN ZA SKLADIŠTENJE, ODLIČNE VOZNE OSOBINE, ISPORUKA 30DANA OD NARUDŽBE
N450 is produced in mono-block form from polyethylene with rotation molding technique. It is designed to offer comfortable and safe cruising pleasure while having a large interior volume to provide maximum usage and safe storage space. It has 100% UV additive and is not affected by seawater, algae and corrosion, it is long-lasting and ergonomic.

Technical Specifications P355
Body The hull is made of polyethylene as mono-block and double-walled with rotation technology. (Click here for polyethylene boat features.)
Length 450 cm
Width 150 cm
Body Weight 240 kg
Fully Equipped Weight 278 kg
Maximum Number of People 5
Maximum Horsepower 37.4 kW (50 HP)
Lifting Capacity 720 kg
Shaft Long – Short
Color Option All international RAL color codes
Certificate CE
Design Category C
N450 FEATURES
Towing eye: Manufactured from 316 chromium. The inner reel is polyethylene. With 3 inserts placed in the polyethylene body, to increase the strength 5 times.
Bow roller: Made of 4mm 316 quality chrome. With two inserts placed in the polyethylene body, the strength has been increased 5 times.
Cleats (3 Pieces): Manufactured from 316 chromium, it has a special design that maximizes durability. The base of the design is 3mm, the reel is 22mm and the top is 4mm. With extra inserts placed in the polyethylene body, the strength has been increased 5 times.
Anchor locker: Produced in polyethylene by rotation moulding. Has a 30-litre capacity.
Chrome railing (4 Pieces): With a radius of 22mm, 3mm chrome pipe. 65cm long.
Storage box + seat (2 Pieces): Made of polyethylene with rotation moulding. Each one has a volume of 60 litres.
Deck mat (optional extra): For added comfort and minimizes slippage with its specially designed surface.
Rowlocks (2 pieces): These are not fixed and can be added by the client if required
Rope (2 Pieces): Each one is 7 mm thick and five m long. Rope ends are covered with special waxing technique.
Water evacuation stopper: Allows the water on the boat to be discharged out of the drain channels when desired.
Storage lockers (2 Pieces): Integrated within the body and is capped with a polyethylene seat cover. Each one has a volume of 50 litres.
Chrome transom plate (1 Piece): Made of 3mm 316 quality chrome. A ridged surface has been created to prevent the engine from sliding
Engine transom (1 Piece): 18mm plywood is encased into the rotational polyethylene. By preventing direct contact with the water, it becomes equally as long lasting as the polyethylene body.
Wall cap (2 Pieces): Suitable to use as an extra storage area. It can be used to access the area between the walls.